Mark-10 MGT Torque Gauge

Low cost Programmable automatic shutoff Programmable default configuration Selectable units of measurement Rugged aluminum housing Remote sensor Peak memory for clockwise and counter clockwise readings IPM - Intelligent Power Management Push-button calibration Capacities from 10 ozin (7 Ncm) to 100 lbin (1150 Ncm) Battery or AC operation Accuracy: ± 0.5% of full scale ±1 digit Sampling rate: 30 readings/sec Safe overload: 150% of capacity Battery life: 30 hours of continuous operation Warranty: 3 year

The MGT Torque Gauge is an economical solution for most basic torque measurement applications. A dedicated remote torque sensor with a Jacobs chuck can be used to grip a sample or fixture. The sensor can be used as a hand held device, or mounted to a torque test stand. The MGT is available in a wide variety of capacities, from 10 ozin to 100 lbin.

Mark-10 BGI Torque Indicator

Fully interchangeable force and torque BGI force/torque sensors with "personality" modules Unlimited number of sensors possible due to unique design Programmable default configuration for each sensor RS-232, Mitutoyo and analog outputs GCL - Gauge Control Language for full computer control Averaging mode for average readings over time External trigger for data capture and switch testing Programmable dual set points with outputs General purpose I/O for external device control Programmable auto-shutoff Selectable units of measurement Push-button calibration Battery or AC operation Peak reading memory Accuracy: ± 0.1% of full scale ±1 digit + sensor's accuracy Sampling rate: 65 readings/sec Warranty: 3 year

The BGI Force / Torque Gauge is a unique product that is designed for working with interchangeable remote force and torque sensors. These sensors cover a variety of force measurement and torque measurement applications and are available in a broad range of capacities. No calibration or setup is required - simply plug and play.

Mark-10 Universal Torque Series Sensor STJ
Compatible with all Mark-10 force gauges, accessories and grips Mounting holes for bench mounting Loading table with 25 #10-32 UNF holes for fixture mounting Precision Acme screw and nut Optional digital travel display Warranty: 3 year

Measure bi-directional torque for a wide variety of applications. Contains a chuck for samples up to 1/2" in diameter, depending on capacity. The sensor can be used as a hand held device, or mounted to a torque test stand. Capacities available from 10 ozin to 100 lbin.

Mark-10 Universal Torque Series Sensor STH
Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Outstanding overload protection Interchangeable chucks (order separately) NIST - traceable calibration certificate included Accuracy: ± 0.20% of full scale ±1 digit + BGI Warranty: 3 year

A great solution for general bi-directional torque testing applications requiring different sample sizes. Three interchangeable chuck capacities and bit holder are available. The sensor can be used as a hand held device, or mounted to a torque test stand. The STH has superb overload protection and is available in capacities from 10 ozin to 100 lbin.

Mark-10 Wrench Extension Torque Sensors Series STE
Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Stainless steel and aluminum construction NIST - traceable calibration certificate included Accuracy: ± 0.6% of full scale ±1 digit + BGI Warranty: 3 year

Convert any wrench to a torque tool with this sensor, or use it as a component of a torque testing system. Capacities available from 200 to 5,000 lbin.

Mark-10 Torque Sensor for Tool Calibration Series STC
Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Rugged aluminum housing Universal mounting May be used for torque tool calibration or as a component of a torque testing system NIST - traceable calibration certificate included Accuracy: ± 0.35% of full scale ±1 digit + BGI Warranty: 3 year

Calibrate torque tools with this torque measurement sensor, or use it as a component of a torque testing system. Tapped holes on every surface allow for easy mounting to a work bench, or fixture within a testing system. Capacities available from 10 ozin to 100 lbin.

Mark-10 Closure Torque Sensors Series STB

Member of the BGI family of interchangeable sensors "Personality module" holds all calibration and configuration data Rugged aluminum housing Reversible jaws for round or rectangular containers Spill proof construction May be used for torque tool calibration NIST - traceable calibration certificate included Accuracy: ± 0.7% of full scale ±1 digit + BGI Weight: STB10Z-STB50Z - 2.2 lbs (1.0 kg), STB12-STB100 - 5.4 lbs (2.5 kg) Warranty: 3 year

Ideal for testing torque on bottle caps, closures, valves, fasteners, and other items in sizes ranging between 0.56 - 5.7 in [14 - 148 mm] in diameter. Models contain reversible jaws or movable posts to easily accommodate a variety of shapes and sizes. Capacities available from 10 ozin to 100 lbin.

Download Mark-10 product information in a pdf format Mark-10 Catalog   BGI Users Manual
EG Users Manual   MGT Users Manual   ES10/ES20 Users Manual

Click here if you would like a quote on a Mark-10 test stands.

For more information on Mark-10 digital force gauges visit: http://www.mark-10.com