Mark-10 Digital Force Gauges Model CG

Compatible with all Mark-10 test stands and grips   RS-232, Mitutoyo and analog outputs GCL-Gauge Control Language for full computer control Automatic timed output on RS-232 Dual set points with outputs Averaging mode for average readings over time External trigger for contact or switch testing and data capture Selectable units of measurement Peak memory for tensile and compressive forces Push-button calibration Ultra-rugged, reversible aluminum housing Same housing size for both capacities (500 lb and 1,000 lb) Accuracy: ± 0.2% of full scale ±1 digit Sampling rate: 65 readings/sec Safe overload: 150% of capacity Battery life: 8-10 hours per charge Warranty: 3 year

The Series CG is ideal for heavy duty spring testing, destructive testing, and other applications requiring up to 1,000 lb of tensile or compressive force. Series CG force gauges include all the advanced features of the Series BG, and are housed in ultra-rugged reversible aluminum housings for years of use in laboratory or factory environments. Use the CG with a TSF Test Stand to form a complete spring testing solution

Mark-10 Digital Force Gauges Model MG

Compatible with all Mark-10 test stands and grips   Reversible aluminum housing for hand use or stand mounting Peak memory for tensile and compressive loads Programmable automatic shutoff Selectable units of measurement Peak memory for tensile and compressive forces Push-button calibration IPM - Intelligent Power Management system Accuracy: ± 0.5% of full scale ±1 digit Sampling rate: 30 readings/sec Safe overload: 150% of capacity Battery life: 30 hours of continuous operation Warranty: 3 year

The Series MG Digital Force Gauge is an economical solution for push and pull testing of up to 500 lb. A rugged reversible aluminum housing allows for hand-held use or test stand mounting. Three push buttons allow the user to easily select units of measurement, reset zero, and recall tensile and compressive peak loads. Use the MG with a test stand and gripping fixtures to create a complete testing solution.Now available in a new 50 gram (0.12 lb) capacity!

Mark-10 Digital Force Gauges Model BG

Compatible with all Mark-10 test stands and grips   RS-232, Mitutoyo and analog outputs GCL-Gauge Control Language for full computer control Automatic timed output on RS-232 Dual set points with outputs Averaging mode for average readings over time External trigger for contact or switch testing and data capture Selectable units of measurement Peak memory for tensile and compressive forces Push-button calibration Reversible aluminum housing for hand use or stand mounting Accuracy: ± 0.2% of full scale ±1 digit Sampling rate: 65 readings/sec Safe overload: 150% of capacity Battery life: 8-10 hours per charge Warranty: 3 year

The Series BG Digital Force Gauge is an advanced force measurement solution, with sophisticated measurement capabilities, data outputs, computer control capabilities, and a long list of features and configurable settings. The BG can stop motorized test stand travel at user-selectable set points, and can also prevent force overload (when used with the ESM motorized test stand). Go / no go testing can also be accomplished with an optional plug-in hi / lo limits indicator. Now available in a new 50 gram (0.12 lb) capacity!

Download Mark-10 product information in a pdf format Mark-10 Catalog   BGI Users Manual
EG Users Manual   MGT Users Manual   ES10/ES20 Users Manual

Click here if you would like a quote on a Mark-10 digital force gauge.

For more information on Mark-10 digital force gauges visit: http://www.mark-10.com