Close

Lloyd Instruments

TG352 Heavy Duty Capstan Action Wedge Grip

Heavy Duty Capstan Action Parallel Wedge Grip. Capstan action enables the sample to be held tightly in the jaws before commencing the test. Available with a range of interchangeable jaw faces (see table below).

Specification

Maximum Capacity 300 kN 67443 lbf
Minimum Load Cell 5 kN 1124 lbf
Gripping Length 100 mm 4.0 in
Max Sample Width 50 mm 2.0 in
Max Sample Thickness 12 mm 0.5 in
Eye End Diameter 50 mm 2.0 in
Weight Each 30 Kg 66 lb
Length Each 195 mm 7.7 in
Temperature Limits -70°C +100°C


Applications
Tensile testing for general metallurgical and composite applications by stretching a sample to break and recording the relationship between force and extension.

TG352:Heavy_Duty_Capstan_Action_Wedge_Grip.pdf

Model Part No. Description
TG15 01/1388 Self Tightening Sliding Wedge Grip (5 kN 1124 lbf)
TG15/C 01/1389 Cross Cut Jaw Faces for TG15 (25 x 50mm - 1 x 2 in)
TG15/S 01/1409 Straight Cut Jaw Faces for TG15 (25 x 50mm - 1 x 2 in)
TG15/R12 01/1390 V Notch Cut Jaw Faces for TG15(4 - 12mm 0.2 - 0.5 inØ)
TG270 01/2399 Capstain Action Parallel Wedge Grips (30 kN - 6744 lbf)
TG270/C 01/2151 Cross Cut Jaw Faces for TG270 & TG280 (25 x 50mm - 1 x 2 in)
TG270/S 01/2340 Straight Cut Jaw Faces for TG270 & TG280(25 x 50mm - 1 x 2 in)
TG270/V15 01/2105 V Notch Cut Jaw Faces for TG270 & TG280(4 - 15mm 0.2 - 0.6 inØ)
TG270/V20 01/2287 V Notch Cut Jaw Faces for TG270 & TG280(15 - 20mm - 1 x 2 inØ)
TG280 01/2405 Capstain Action Parallel Wedge Grips (50 kN - 11241 lbf) - Jaw faces see above
TG295 01/2951 Capstain Action Parallel Wedge Grips (100 kN - 22481 lbf)
TG295/C 01/2406A Cross Cut Jaw Faces for TG295 (50 x 70mm (2 x 2.8 in) wide, 10 x 28mm (0.4 x 1.1in) thick
TG295/V12 01/2407A V Notch Jaw Faces for TG295 (Samples: 6 - 12mm, 0.2 - 0.5 in Ø)
TG295/V24 01/2407B V Notch Jaw Faces for TG295 (Samples: 12 - 24mm, 0.5 - 1.0 in Ø)
TG295/V36 01/2407C V Notch Jaw Faces for TG295 (Samples: 24 - 36mm, 1.0 - 1.4 in Ø)
TG352 01/2781 Heavy Duty Parallel Wedge Grips (300 kN 67443 lbf)
TG352/F1 01/2782 Straight Cut Jaw Faces for TG352 (0 - 20mm, 0 - 0.8 in thick)
TG352/F2 01/2783 Straight Cut Jaw Faces for TG352 (20 - 40mm, 0.8 - 1.6 in thick)
TG352/V10 01/2784 V Notch Jaw Faces for TG352 (Samples: 10 - 20mm, 0.4 - 0.8 in Ø)
TG352/V15 01/2785 V Notch Jaw Faces for TG352 (Samples: 15 - 30mm, 0.6 - 1.2 in Ø)
TG352/V26 01/2786 V Notch Jaw Faces for TG352 (Samples: 26 - 40mm, 1.0 - 1.6 in Ø)