TG180 3- and 4-Point Bend Jig
This jig operates in compression only with a single screw span adjustment. Used for performing unidirectional bending tests on rigid and semi-rigid materials. Supplied with 6.35 mm (1/4 in) sample supports.
Displacement measurement may be achieved by using a high precision LVDT device.
10 kN, 2248 lbf
Complete jig. LVDT device not included.
Used to determine the flexural properties of rigid and semi-rigid materials including glass, ceramics, composites, wood and plastics.
|Maximum Capacity||10 kN||2248 lbs|
|Minimum Loadcell||500 N||112.5 lbs|
|Max Sample Width||30 mm||1.18 in|
|Eye End Diameter||15.85 mm||5/8 in|
|Weight||8 Kg||17.6 lb|
|Span Adjustment||10 - 150 mm||0.39 - 5.91 in|
|TG180||01/1953||Three and Four Point Bend Flexural Jig - 10 kN (2248 lbf)|