Close

Chatillon

TT Series Pneumatic Wire Tester

The TT Series is a pneumatically-operated tester for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for arreas where intrinsic safety is required (when used with a mechanical gauge). The TT Tester operates using clean, dry air with a maximum air pressure up to 160 psig (11.2 bar). The TT Tester meets MIL-T-7928 (ASG) requirements for crimped, solderless lugs. The tester may be used for tensile or compression testing. The rapid test speed makes it ideal for production line testing, incoming inspection testing or for the R&D laboratory. The TT Tester features a 6-inch (15 cm) test stroke. Ram speed may be controlled as low as 0.1-inch (2.5 mm) per minute. The TT Tester is available in two models: one with a foot-actuated switch; the other with a hand-actuated switch.

Features

  • Easy to Use, Rugged Construction
  • Meets MIL-T-7928 (ASG) Requirements
  • 6-inch (15 cm) Stroke
  • Precision Ram Speed Control to 0.1-inch/min
  • Independent Return Speed
  • Automatic Retracting Steel ZJaw
  • Maintenance-free Design
  • 1 Year Warranty

    Specifications
Capacity:      550 lbf (2500 N)
Speciment Capacity:   From 1-inch to 15-inches (25.4 to 381 mm) Length 7/32-inch OD
Crosshead Speed:   Double Acting Ram 6-inch/min - Adjustable Rams Speeds to 0.1-inch/min
Travel:         6-inches (152 mm) - Jaw Opens to 7/32-inch (5.6mm) - Jaw Closes in 1/2-inch (12.7mm) Travel
Load Measuring:  Chatillon Force Gauge
Air Motor:     Requires 60 psi (4.2 bar) for 225 lbf (1 kN) Requires 125 psi (8.7 bar) for 550 lbf (2.5 kN)  Maximum Air Pressure is 160 psi (11.2 bar)
Operating Temp:   40° to 95°F (5° to 35°C)
Weight:     Approx. 33 to 52 lbs option dependent 
Warranty:   1 year
Order No.   
Description
ML1797 Foot Pedal Control Kit
P-10174   Air Filter Regulator Kit
ML4242 Jaw Repair Kit