Eye End Adapters
AMETEK supplies a variety of thread eye adapters and anchor pins for connecting testing fixtures to your force gauge, load cell sensor and force tester. These adapters are used with fixtures that attached to your instrumentation with a grip pin and locking rings. They have no threads for connecting to a device.
Eye end adapters, also known as anchor pins, will typically have a 5/8” diameter (15.9mm) or 1-14” (31.8mm) diameter. These accessories are generally made of aluminum (low force applications) or stainless steel.
Load Cell Eye End Adpters
|NC003139||#10 - 32M thread, with 5/8" eye-end, aluminum|
|NC003137||5/16-18M thread, with 5/8" eye end, stainless steel|
|NC003138||1/2- 20M thread, with 5/8" eye end, stainless steel|
|NC003140||3/4-16 thread, aluminum|
|NC003131||M24 thread, stainless steel|
|NC003141||Grip pin, 2.7" x 0.5", aluminum|
|NC000612||Grip pin, 78.5mm x 12mm, steel|
|NC003030||Spanner wrench, used for tightening locking rings to testing fixtures|