Series EG Advanced Digital Force Gauges - Discontinued/Replaced bySeries 4

The Series EG is an ideal instrument for compression and tension applications requiring accuracy and flexibility up to 500 lbF. Features include selectable units of measurement, automatic peak memory, simple pushbutton calibration, programmable automatic shutoff, initial status of units and mode of operation, permanent configuration memory, and optional outputs (RS-232, Mitutoyo, and analog). Reversible aluminum housing allows for hand-held use or test stand mounting.


Accuracy: ±0.3% of full scale ±1 digit
Sampling rate: 30 readings/s
Display rate: 2.5 updates/s in normal mode / 30 updates/s in peak mode
Power: AC or rechargeable battery with Intelligent Power Management System (IPM). IPM warns the user via a “LO BAT” indicator and then will power off the gauge
Battery life: 8-10 hours of continuous use
Selectable units of measurement: lbF, N, kg/g (depending on model)




Fully configurable up to 9600 baud
Serial BCD suitable for all

Mitutoyo SPC-compatible devices

±1 VDC, ±0.25% of full scale at capacity. + for compression, - for tension.
Configurable settings: RS-232, Mitutoyo BCD, automatic shutoff, initial (default), calibration
Load cell deflection: 0.010 in [0.25 mm] at full capacity
Safe overload: 150% of full scale (display shows “----” at 110% and above)
Weight (gauge only): EG012 - EG200: 0.95 lb [0.4 kg], EG500: 1.12 lb [0.5 kg]
Environmental requirements: 40°F - 100°F [5°C - 45°C],
Thermal effects: Zero: 0.03% of full scale/°C, Span: 0.01% of full scale/°C
Housing construction: Aluminum
Included accessories: Hook, flat


Data outputs Optional RS-232, Mitutoyo (Digimatic),and analog outputs.
Push-button calibration Simple and quick calibration procedure
Peak memory For tension and compression
Selectable units of measurement Measure in lbF, kg/g, or N (depending on model)
Customizable default configuration Set filters, communications settings, measurement settings, mode of operation, and more

Optional Equipment

Outputs package EGRS RS-232, Mitutoyo (Digimatic), and analog outputs. Available at time of purchase or as an upgrade.
Output cables Various data output cables are available
Overload protection module 11-1042 Protects the force gauge against overloads during motorized tests, adjustable from 10% to 150% of gauge’s full capacity. For use with motorized test stands. Requires EGRS.