JLW Instruments Metrology Concepts, Inc. and IMADA are proud to offer Mechanical and Digital Force Gauges, Test Stands, Torque Testers and Torque wrenches.

IMADA manufactures some of the most accurate yet rugged mechanical and digital hand held force and torque gauges available. While there are many manufactures offering lines of force and torque gauges, we are confident that when you see the detail which has gone into these precision instruments that your choice will be clear when you are looking to purchase or upgrade hand held force and torque instruments.

Mechanical Series force gauge: FB ±0.3%F.S., PS ±0.1%F.S., MF ±0.3%F.S.

The rugged construction of the FB/PS mechanical force gauges will withstand industrial environments and yet retain calibration for extended periods. Ergonomic design makes it ideal for hand held use, or it can be mounted to a test stand. The Zero-Tare ring allows you to zero the gauge to compensate for measuring attachments and changes in measuring position. The real time/peak hold selector switch allows you to observe transients or capture peaks. Many ranges are available to cover all of your measurement needs (also available in Newtons).

The FB series mechanical force gauge is sold in kits complete with force gauge, hard carrying case, five measuring attachments (flat head, conical, chisel, notched, and small hook) as well as a 3 inch extension shaft. PS resolution is 2 times greater than FB and the kit includes everything in the FB kit plus a large hook and Y-hook.

DPS Series: ±0.2% + 1 LSD

The DPS digital force gauge series represents the latest technology in an affordable, feature packed instrument. The rugged metal housing is ergonomically designed to fit your hand, yet durable enough to withstand harsh industrial environments. The easy to read display tells you at a glance the unit of force measurement (lb, kg, or Newtons), tension or compression, if you are in Peak Mode, and whether the built-in NiCad batteries are low. The standard outputs (RS-232C, Digimatic, and ±1VDC analog) allow you to capture data for permanent record. Choose the range or ranges that best suit your needs. All DPS digital force gauges are sold complete in kit form with force gauge, hard plastic carrying case, and a full set of measuring attachments, extension rod, and AC adapter/charger. All DPS digital force gauges can be run on the internal NiCad batteries or the AC adapter/charger.

Note: Use an "R" suffix for reverse display units (for use on vertical test stand)

DPSH digital force gauge Series: ±0.2% + 1 LSD

The DPSH digital force gauges represent the latest technology in an affordable, feature packed instrument. The rugged metal housing is durable enough to withstand harsh industrial environments. The easy to read display tells you at a glance the unit of force measurement (lb, kg, or Newtons), tension or compression, if you are in Peak Mode, and whether the built-in NiCad batteries are low. The standard outputs (RS-232C, Digimatic, and ±1VDC analog) allow you to capture data for permanent record. Choose the range or ranges that best suit your needs. All DPSH force gauges are sold complete in kit form with force gauge, hard plastic carrying case, and a full set of measuring adapters, extension rod, and AC adapter/charger. All DPSH gauges can be run on the internal NiCad batteries or the AC adapter/charger.

Z2 digital force gauge Series: ±0.2% + 1 LSD

The Z2 series are high performance, digital force gauges which offer programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.

All Z2 digital force gauges are sold in kits which include the force gauge, hard plastic carrying case, AC adapter/charger, and attachments (flat head, conical, chisel, notched, small hook, large hook, Y-fork, and extension rod). Built-in Ni-MH rechargeable batteries.

Z2H digital force gauge Series: ±0.2% + 1 LSD

The Z2H series are high performance, digital force gauges which offer programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint.

Store up to 1,000 values in memory, which can be transmitted using the Digimatic or serial output ports. Use the real time mode to display load transients, or the peak mode to capture the peak force achieved during a test. Selectable measuring units of lbf, kgf, or Newtons.

All Z2H digital force gauges are sold in kits which include the force gauge, hard carrying case, AC adapter/charger, tension hook, four compression adapters, extension shaft and knurled steel handles. Built-in NI-MH rechargeable batteries.

Z2S-DPU digital force gauge Series: ±0.2% + 1 LSD

The Z2S-DPU series are high performance digital force gauges that feature a separate sensor that is ideal for confined spaces or difficult to reach measurements. All standard sensors are good for both compression and tension. A standard six foot cable connects the gauge to the sensor.

Store up to 1,000 values in memory, which can be displayed or transmitted using the serial output port. Use the real time mode to display load transients, or the peak mode to capture the peak force achieved during a test. Selectable measuring units of lbf, kgf, or Newtons.

Imada motorized test stand series MV-110

The MV-110 motorized test stand offer consistent and reliable testing. Combination of screw system and state of the art brushless motor provides extremely smooth and powerful operation over the entire speed range. The MV-110 accepts any of the standard range Imada force gauges. Quick switch and Emergency Stop features are also included.

AP-002 Adapter Plate is available to mount most other force gauges to Imada test stands.

Imada motorized test stand series MV-220

The MV-220 motorized test stands offer consistent and reliable testing. It features dual speed mode: fixed speed (presettable) and adjustable speed. They accept any of the standard range Imada force gauges. Quick return and Emergency Stop features are also included.

Manual Mode: While the Direction switch is held up, the head moves up. Holding the switch down moves the cross head down. When the switch is released the head stops. This mode is ideal for positioning.
Single Cycle Mode: When the Direction switch is pushed up, the cross head moves up at the desired speed, and when it reaches the top travel limit, it automatically goes back and stops at the bottom travel limit, completing one cycle. Pushing the switch down runs the cycle in reverse.
Auto Cycle Mode: This mode is similar to Single Cycle mode, except that the cross head travels up and down repeating the cycle until either the Power or Emergency switches is turned off. This mode is ideal for applications such as fatigue testing.

Imada also offers products to measure and apply torque

Z2S-DTX2 Series: ±0.5% + 1 LSD

Imada’s DTX2 cap torque tester offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint. Store up to 1,000 values in memory, which can be transmitted using the serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm. DTX2 cap torque testers include AC adapter/charger and built-in Ni-MH rechargeable batteries, 1" high standard pegs (optional long pegs available).

Series i Series: ±0.5% + 1 LSD

Imada’s Series i digital torque tester is ideal for calibrating power screwdrivers with torque control. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value. Standard 3/8" drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are sold in kit form complete with tester, hard carrying case, 2 smart driver adapters and AC charger/adapter. A calibration kit is also available. Do not use with impact or air tools (Ask for DI-1M impact wrench torque tester). Smart driver adapters simulate screw tightening, eliminating the need for reversing the power driver which is required for conventional driver adapters.

Imada DI-4B-25 Air Tool & Impact Wrench Digital Torque Tester

Imada's DI-4B-25 fast response torque testers are perfectly suited for on-the-spot calibration of air tools and impact drivers, and will calibrate any type of manual wrenches as well. This torque tester gives a digital readout of peak value in either direction and also indicate the number of blows for a selected time period. This torque tester has an accuracy of ±0.5%, ±1 LSD, Peak, Real Time and Peak Down modes, and provides peak data for SPC (statistical process control) via the RS232 port. Calibrate your own air tools and impact drivers and save down time.

DI-3N-1P Digital Torque Tester with Remote Sensor

Imada's DI-3N-1P Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lb-ft. It has an accuracy of ± .5% F.S., ± 1 LSD and measures torque in Peak, Real Time and Peak Down modes (selectable). Do not use with impact tools (Ask for DI-1M impact wrench torque tester). Use the 400 internal memory for peak data recall or RS-232 download for analysis by Imada data acquisition software SW-1S.

Imada Series DI-1M Digital Torque Tester

Imada Series DI-1M Digital Torque Tester are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power driver. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. RS-232 output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It is powered by an internal NiCad battery or the included AC adapter.

Imada also offers torque screwdrivers and wrenches

Imada Torque Screwdriver DSD-4 Light Weight Torque Screwdriver

Imada Torque Screwdriver DSD-4 torque screwdriver features an integral/adjustable LCD display for convenient torque readings. The unit is designed for screw tightening torque verification and measures in Peak, Real Time, and Peak Down measuring modes (selectable). The DSD-4 torque screwdriver has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Use the 400 internal memory for peak data recall or RS-232 download for SPC. The DSD-4 torque screwdriver substantially reduces scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies. Model DSD-4 torque screwdriver is sold in kits which includes the tester/screwdriver, stepless one-way clutch adapter, Phillips tips, AC adapter/charger and carrying case

If your interested in learning more about the IMADA line of Instruments please contact JLW Metrology Concepts, Inc. at:  sales@jlwinstruments.com