• Crosshead speed range 0.5-19.7in/min (12.5-500mm/min)  
• Single cycle test mode with full-speed return
• Auto-travel reverse on alarm point or sample break
• Pre-setable upper & lower travel limits
• Indication of crosshead speed and direction of travel
• Headroom up to 13 in (330mm)
• CE marked

The SnapShot, coupled with a Dillon Quantrol Force Gauge and fixtures, constitutes a simple and economical, yet powerful testing system.

Download the:  SnapShot Brochure      

• The AFG features an interchangeable loadcell cartridge for quick capacity changes. Each Advanced Loadcell Cartridge (ALC)’s calibration and capacity are automatically recognized by the AFG for immediate use. Nine different ALC capacities are available, ranging from 2.5N - 1000N (0.55lbf - 220lbf).
• Peak readings for both tension and compression are accurately captured with a 5000Hz internal sampling rate.
• The AFG includes advanced display features: Peak readings in both tension and compression can be displayed while monitoring the live reading. The display readout can be inverted with the touch of a button. A load-bar graph on the display provides a quick visual representation of applied load to assist in preventing overload. The display is backlit for easy reading in dimly lit areas.
• The AFG can be connected to external Quantrol Smart Force and Torque Sensors. When connected, these sensors are automatically recognized, requiring no additional calibration or setup. 
• Configurable communication protocols and outputs including RS-232, Analog and Mitotoyo for bi-directional data transfer, the AFG can control data loggers and test stands.
• Cycle test mode where any number of cycles are executed between user configurable load points. Also, the AFG is able to stop or reverse the test stand based upon a load value or sample break.

• 0.25% Accuracy in 6 Capacities
• 1000Hz Data Acquisition
• RS-232 Communication
• Test Stand Interface
• Versatile Display
• On-board Loadcell Diagnostics