Chatillon Digital Test Stands The CHATILLON® LTCM-100 Series motorized tester, combined with a Chatillon gauge, is perfect for applications requiring an economical solution to tensile or compression testing. The LTCM-100 motorized test stand has a large work area making it ideal for production environment or applications with large test samples. Crosshead movement is operator controlled using a switch that can be set to move the crosshead up or down at a specified speed. Speed is user-selectable. Positive braking and high and low limits are standard. Force Capacity 110 lbf (500 N) Features Selectable Speed Control with LED Indicator; 0.2 - 20.0 in/min (5.0 - 500 mm/min) Independent Return Speed Mechanical Deflection Limits 15-inches (380mm) Travel Large Working Area Lightweight, Portable Design The TCM201 Series of motorized test stands offer customers an easy-to-operate motorized testing system that is precise enough for the laboratory and rugged enough for the production floor. Stands feature an all-metal construction with ball screw and dual support columns for positive motor control and minimal deflection. Manually adjustable limits stop crosshead travel at precise user specified locations. Rotary dials are easy to operate and allow the user to specify speed requirements and test mode. Dedicated function keys provide fast motion control adjustment (up, down, stop). Units operate in four modes: single cycle at upper limit, single cycle at lower limit, continuous cycling between limits, and manual. A selector switch is provided for specifying return speed after test completion. The TCD200 Series of motorized test stands offer customers an easy-to-operate motorized testing system with bi-directional RS232 serial data communications. An integral membrane-style keypad is used for motor and speed control and permits the user to specify the speed range, cycling and high/low deflection setpoints. Stands feature an all-metal construction with ball screw and dual support columns for positive motor control and minimal deflection. Manually adjustable limits stop crosshead travel at precise user specified locations. Dedicated function keys provide fast motion control adjustment (up, down, stop). Units operate in four modes: single cycle at upper limit, single cycle at lower limit, continuous cycling between limits, and manual. Two LCD displays indicate speed, cycling and deflection and are used to configure test stand operating parameters.   Back     Chatillon peel test fixtures

Click here if you would like a quote on an Ametek Chatillon instrument.